TP-Link TL-SL5428E User Guide - Page 71

TL-SL5428E 24-port 10/100Mbps + 4-port Gigabit L2 Managed Switch CLI Guide Chapter 12 Binging Table Commands You can bind the IP address, MAC address, VLAN and the connected Port number of the Host together, which can be the condition for the ARP Inspection and IP Source Guard to filter the packets. binding-table user-bind Description The binding-table user-bind command is used to bind the IP address, MAC address, VLAN ID and the Port number together manually. You can manually bind the IP address, MAC address, VLAN ID and the Port number together in the condition that you have got the related information of the Hosts in the LAN. Syntax binding-table user-bind hostname ip-addr mac-addr vlan vid port port-num {none | arp-detection | ip-source-guard | both} Parameter hostname --The Host Name, which contains 20 characters at most. ip-addr -- The IP Address of the Host. mac-addr -- The MAC Address of the Host. vid --The VLAN ID neened to be bound, ranging from 1 to 4094. port-num -- The number of port connected to the Host. {none | arp-detection | ip-source-guard | both}--The protect type for the entry. arp-detection indicates ARP detection; ip-source-guard indicates IP filter; none indicates appling none; both indicates appling both. Command Mode Global Configuration Mode Example Bind an ACL entry with the IP is 192.168.0.1, MAC is 00:00:00:00:00:01, VLAN ID is 2 and the Port number is 5 manually. Andthen enable the entry for the ARP detection and IP fitler function: 59