TP-Link TL-SL5428E User Guide - Page 78
dhcp-snooping decline
UPC - 845973020873
View all TP-Link TL-SL5428E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
TL-SL5428E 24-port 10/100Mbps + 4-port Gigabit L2 Managed Switch CLI Guide To restore to the default configuration, please use no dhcp-snooping rate-limit command. Syntax dhcp-snooping rate-limit value no dhcp-snooping rate-limit Parameter value --The value of Flow Control. The options are 0/5/10/15/20/25/30 (packet/second). The default value is 0, which stands for disable. Command Mode Interface Configuration Mode(interface ethernet / interface range ethernet) Example Set the Flow Control of port 2 as 20 pps: TP-LINK(config)# interface Ethernet 2 TP-LINK(config-if)# dhcp-snooping rate-limit 20 dhcp-snooping decline Description The dhcp-snooping decline command is used to enable the Decline Protect feature. To disable the Decline Protect feature, please use no dhcp-snooping decline command. Syntax dhcp-snooping decline no dhcp-snooping decline Command Mode Interface Configuration Mode(interface ethernet / interface range ethernet) Example Enable the Decline Protect feature of port 2: TP-LINK(config)# interface Ethernet 2 TP-LINK(config-if)# dhcp-snooping decline 66