TP-Link TL-SL5428E User Guide - Page 97
dot1x port-method
UPC - 845973020873
View all TP-Link TL-SL5428E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
TL-SL5428E 24-port 10/100Mbps + 4-port Gigabit L2 Managed Switch CLI Guide please use no dot1x port-control command. Syntax dot1x port-control { auto | authorized-force | unauthorized-force } no dot1x port-control Parameter auto | authorized-force | unauthorized-force -- The Control Mode for the port. Auto: In this mode, the port will normally work only after passing the 802.1X Authentication. Authorized-force: In this mode, the port can work normally without passing the 802.1X Authentication. Unauthorized-force: In this mode, the port is forbidden working for its fixed unauthorized status. By default, the Control Mode is auto. Command Mode Interface Configuration Mode(interface ethernet / interface range ethernet) Example Configure the Control Mode for port 1 as authorized-force: TP-LINK(config)# interface Ethernet 1 TP-LINK(config-if)# dot1x port-control authorized-force dot1x port-method Description The dot1x port-method command is used to configure the Control Type of IEEE 802.1X for the specified port. To restore to the default configuration, please use no dot1x port-method command. Syntax dot1x port-method { mac-based | port-based } no dot1x port-method Parameter mac-based | port-based --The Control Type for the port. Mac-based: Any client connected to the port should pass the 802.1X 85