TP-Link TL-SL5428E User Guide - Page 187
snmp community-add, TL-SL5428E, TP-LINKconfig# snmp user-add, smode
UPC - 845973020873
View all TP-Link TL-SL5428E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 187 highlights
TL-SL5428E 24-port 10/100Mbps + 4-port Gigabit L2 Managed Switch CLI Guide options. None indicates no privacy method is used, and DES indicates DES encryption method is used. By default, the Privacy Mode is none. encrypt-pwd -- Privacy Password, ranging from 1 to 16 characters. Command Mode Global Configuration Mode Example Add User admin to Group group2, and configure the Security Model of the user as v3, the Security Level of the group as authPriv, the Authentication Mode of the user as MD5, the Authentication Password as 11111, the Privacy Mode as DES, and the Privacy Password as 22222: TP-LINK(config)# snmp user-add admin local group2 smode v3 slev authPriv cmode MD5 cpwd 11111 emode DES epwd 22222 snmp community-add Description The snmp community-add command is used to add Community. To delete the corresponding Community, please use no snmp community-add command. SNMP v1 and SNMP v2c adopt community name authentication. The community name can limit access to the SNMP agent from SNMP network management station, functioning as a password. Syntax snmp community-add {name} { read-only | read-write } {mib-view} no snmp community-add {name} Parameter name -- Community Name, ranging from 1 to 16 characters. read-only | read-write -- The access rights of the community, with read-only and read-write options. mib-view -- The MIB View for the community to access. Command Mode Global Configuration Mode Example Add Community community1, and the community has read-write management right to View view1: 175