TP-Link TL-SL5428E User Guide - Page 174
igmp vlan-config, TL-SL5428E, TP-LINKconfig# igmp vlan-config-add, rtime, rport
UPC - 845973020873
View all TP-Link TL-SL5428E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 174 highlights
TL-SL5428E 24-port 10/100Mbps + 4-port Gigabit L2 Managed Switch CLI Guide seconds. By default, it is 260. leave-time -- Leave Time, which is the interval between the switch reveiving a leave message from a host and the switch removing the host from the multicast groups. Leave Time ranges from 1 to 30 in seconds. By default, it is 1. router-port -- Static Router Port, which is mainly used in the network with stable topology. It ranges from 1 to 28. Command Mode Global Configuration Mode Example Enable IGMP Snooping for VLAN 1, and configure Router Port Time as 200 seconds, Member Port Time as 100 seconds, Leave time as 10 seconds and Static Router Port as port 1: TP-LINK(config)# igmp vlan-config-add 1 rtime 200 mtime 100 ltime 10 rport 1 igmp vlan-config Description The igmp vlan-config command is used to modify IGMP Snooping parameters for individual VLANs. To return to the primary configuration of the corresponding VLAN, please use no igmp vlan-config command. Syntax igmp vlan-config {vlan-id} [rtime router-time] [mtime member-time] [ltime leave-time] [rport router-port] no igmp vlan-config {vlan-id} Parameter vlan-id -- The ID of the VLAN desired to modify configuration, ranging from 1 to 4094. router-time -- Router Port Time. Within this time, if the switch does not receive IGMP query message from the router port, it will consider this port is not a router port any more. Router Port Time ranges from 60 to 600 in seconds. By default, it is 300. member-time -- Member Port Time. Within this time, if the switch does not receive IGMP report message from the member port, it will consider this port is not a member port any more. Member Port Time ranges from 60 to 600 in 162