TP-Link TL-SL5428E User Guide - Page 31
switchport pvid, switchport general egress-rule
UPC - 845973020873
View all TP-Link TL-SL5428E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
TL-SL5428E 24-port 10/100Mbps + 4-port Gigabit L2 Managed Switch CLI Guide TP-LINK(config)# interface Ethernet 2 TP-LINK(config-if)# switchport allowed vlan add 2 switchport pvid Description The switchport pvid command is used to configure the PVID for the switch ports. Syntax switchport pvid vlan-id Parameter vlan-id -- VLAN ID, ranging from 1 to 4094. Command Mode Interface Configuration Mode (interface ethernet / interface range ethernet ) Example Specify the PVID of port 2 as 2: TP-LINK(config)# interface Ethernet 2 TP-LINK(config-if)# switchport pvid 2 switchport general egress-rule Description The switchport general egress-rule command is used to configure the egress-rule of the general port. Syntax switchport general egress-rule { untagged | tagged } Parameter untagged | tagged --egress-rule,untagged or tagged Command Mode Interface Configuration Mode ( interface ethernet / interface range ethernet ) Example Specify the egress-rule of port 2 as tagged: TP-LINK(config)# interface Ethernet 2 19