TP-Link TL-SL5428E User Guide - Page 164

TL-SL5428E 24-port 10/100Mbps + 4-port Gigabit L2 Managed Switch CLI Guide Syntax spanning-tree region {name} {revision} Parameter name -- The region name, used to identify MST region. It ranges from 1 to 32 characters. revision -- The revision for MST region identification, ranging from 0 to 65535. Command Mode Global Configuration Mode Example Configure the region name of MSTP as r1, and the revision level as 100: TP-LINK(config)# spanning-tree region r1 100 spanning-tree msti Description The spannint-tree msti command is used to configure MSTP Instance. To return to the default configuration of the corresponding Instance, please use no spanning-tree msti command. Instance Configuration, a property of MST region, is used to describe the VLAN-to-spanning-tree mapping configuration. You can assign VLAN to different instances appropriate to your needs. Every instance is a VLAN group independent of other instances and CST. Syntax spannint-tree msti {msti-id} [status { disable | enable }] [pri priority] [mapped mapped] no spanning-tree msti {msti-id} Parameter msti-id -- Instance ID, ranging from 1 to 8. status - - Enable/ Disable the corresponding instance. By default, it is disabled. priority -- MSTI Priority, which must be multiple of 4096 ranging from 0 to 61440. By default, it is 32768. MSTI priority is an important criterion on determining if the switch will be chosen as the root bridge in the specific instance. mapped -- VLAN-Instance mapping. Enter the VLAN ID which belongs to 152