TP-Link TL-SL5428E User Guide - Page 30
switchport type, switchport allowed vlan, Description, Syntax, Parameter, Command Mode, Example
UPC - 845973020873
View all TP-Link TL-SL5428E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
TL-SL5428E 24-port 10/100Mbps + 4-port Gigabit L2 Managed Switch CLI Guide TP-LINK(config)# interface vlan 2 TP-LINK(config-if)#description vlan2 switchport type Description The switchport type command is used to configure the Link Types for the ports. Syntax switchport type { access | trunk | general } Parameter access | trunk | general -- Link Types. There are three Link Types for the ports. Command Mode Interface Configuration Mode ( interface ethernet / interface range ethernet ) Example Specify the Link Type of port 5 as general: TP-LINK(config)# interface Ethernet 5 TP-LINK(config-if)#switchport type general switchport allowed vlan Description The switchport allowed vlan command is used to add the desired port to IEEE 802.1Q VLAN,or to remove a port from the correspounding VLAN. Syntax switchport allowed vlan add vlan-list switchport allowed vlan remove vlan-list Parameter vlan-list -- VLAN ID list, it is multi-optional. Command Mode Interface Configuration Mode ( interface ethernet / interface range ethernet ) Example Add port 2 to IEEE 802.1Q VLAN: 18