TP-Link TL-SL5428E User Guide - Page 133

TL-SL5428E 24-port 10/100Mbps + 4-port Gigabit L2 Managed Switch CLI Guide User Guidelines Command in the Interface Range Ethernet Mode is executed independently on all ports in the range. It does not effect the execution on the other ports at all if the command results in an error on one port. Example Enter the Interface Configuration Mode, add ports 1-3, 6-9 to the port-list and configure them: TP-LINK(config)# interface range Ethernet 1-3,6-9 description Description The description command is used to add a description to the Ethernet port. To clear the description of the corresponding port, please use no description command. Syntax description string no description Parameter string -- Content of a port description, ranging from 1 to 16 characters. Command Mode Interface Configuration Mode（interface Ethernet） Example Add a description Port #5 to port5: TP-LINK(config)# interface Ethernet 5 TP-LINK(config-if)# description Port #5 shutdown Description The shutdown command is used to disable an Ethernet port. To enable this port again, please use no shutdown command. Syntax shutdown 121