TP-Link TL-SL5428E User Guide - Page 201
Cluster Commands, cluster ndp
UPC - 845973020873
View all TP-Link TL-SL5428E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 201 highlights
TL-SL5428E 24-port 10/100Mbps + 4-port Gigabit L2 Managed Switch CLI Guide Chapter 29 Cluster Commands Cluster Management function enables a network administrator to manage the scattered devices in the network via a management device. After a commander switch is configured, management and maintenance operations intended for the member devices in a cluster is implemented by the commander device. cluster ndp Description The cluster ndp command is used to configure NDP globally. To return to the default configuration, please use no cluster ndp command. NDP (Neighbor Discovery Protocol) is used to discover the information of the directly connected neighbor devices to support cluster establishing. An NDP-enabled device sends NDP packets regularly to neighbor devices as well as receives NDP packets from neighbor devices. An NDP packet carries the aging time, which indicates the period of the receiving devices to keep the NDP packet. Syntax cluster ndp [status { disable | enable }] [aging-timer aging-timer] [hello-timer hello-timer] no cluster ndp Parameter status -- Enable/ Disable NDP function globally. By default, it is enabled. aging-timer -- Aging Time, which is the period for the neighbor switch to keep the NDP packets from this switch. Aging Time ranges from 5 to 255 in seconds. By default, it is 180. hello-timer -- Hello Time, which is the interval to send NDP packets. Hello Time ranges from 5 to 254 in seconds. By default, it is 60. Command Mode Global Configuration Mode Example Enable NDP function globally, and configure Aging Time as 120 seconds, Hello Time as 50 seconds: TP-LINK(config)# cluster ndp status enable aging-timer 120 hello-timer 50 189