Thermador PRD48JDSGU Use and Care Manual - Page 25

Using the STAR® Burners Sealed STAR® Burners Control Knobs A pair of control knobs is located on the control panel, directly in front of the pair of gas STAR® burners they control - with one gas STAR® burner positioned in front of the other on the rangetop. H HI HI Star ® OFF Bezel OFF Knob Figure 8: STAR® Brass Burner Base The cooktop features six gas surface STAR® burners; each rated at 18,000 BTU / HR (15,000 BTU / HR using propane). The STAR® burners are mounted on top of unique-shaped pedestals; this makes the STAR® burner assemblies easier to clean. Each STAR® burner has a unique QuickClean™ Base feature which allows the burner and area around the burner assembly to be easier to clean. Figure 10: Standard STAR® Burner Control Knob The symbol near each STAR® burner control knob identifies the STAR® burner position on the range cooktop. Left Rear Center Rear Right Rear Griddle The two left and two right STAR® burners have the exclusive ExtraLow® simmering feature, any remaining STAR® burners are Standard. Each STAR® burner has its own control knob. Left Front Center Front Right Front ExtraLow® ExtraLow® Standard Griddle ExtraLow® Standard ExtraLow® and ExtraHigh Figure 9: Burner Power Features Figure 11: Cooktop Symbols Operation of the STAR® Burners • Press in on the knob and turn it counter-clockwise to the HI setting. • The igniter for the selected STAR® burner sparks to ignite the STAR® burner. • After flame ignition, the igniter stops sparking. • Rotate the knob to any flame setting between HI and SIM. • A blue light is positioned directly above each STAR® burner control knob. The light turns on when the control knob is rotated to an active mode. It is off when the control knob is in the OFF position. English 21