Thermador PRD48JDSGU Use and Care Manual - Page 27
Burner Cap Placement, Checking Burner Cap Placement
![]() |
View all Thermador PRD48JDSGU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
STAR® Burner Cap Placement The STAR® burner caps must be properly placed on the STAR® burner bases for the cooktop to function properly. If the STAR® burner cap is not properly placed, one or more of the following problems may occur. • Burner flames are too high. • Flames shoot out of burners. • Burners do not ignite. • Burner flames light unevenly. • Burner emits gas odor WARNING: To prevent flare-ups and avoid the creation of harmful by-products, do not use the cooktop without all STAR® burner caps and all burner grates properly positioned. WARNING: To prevent burns, DO NOT touch STAR® burner caps or grates while hot. Turn the cooktop off and allow the burners to cool. Checking Burner Cap Placement • Check each STAR® burner to make sure there is no gap between the STAR® burner cap and STAR® burner base. See Figures 5 and 6: Correct and Incorrect STAR® Burner Cap Placement to see examples of correct and incorrect placements of the STAR® burner cap. • You may gently try to move the STAR® burner caps from side to side to check if the caps are properly placed on the STAR® burner bases. When properly placed, each STAR® burner cap will rest flat on top of its STAR® burner base, and completely cover the starshape of the STAR® burner base when viewed from the top as shown below. Figure 13: Correct STAR® Burner Cap Placement Star ® Star ® Figure 14: Incorrect STAR® Burner Cap Placement English 23
![](/manual_guide/products/thermador-prd48jdsgu-use-care-manual-e47e2fc/27.png)