Thermador PRD48JDSGU Use and Care Manual - Page 93
Cleaning the Rack Rail Frames
View all Thermador PRD48JDSGU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
Descaling Phase 1. Using only the descaling tablets recommended for this oven (BSH part number 573828; obtain from your retailer or order from http://www.thermador-eshop.com), mix 32 oz. (1 quart or 0.95 liter) of water with a packet of powder descaler to produce the descaling solution. 2. Empty the water tank and refill it with the descaling solution. On the display, under the SETTINGS menu, scroll with the "+/-" buttons to DESCALE and press "ENTER". The display will then show START DESCALE? YES". Note: Toggling with the "+/-" buttons gives the option START DESCALE? NO. If you press "ENTER" when the display shows START DESCALE? NO, the display returns to the previous menu, showing DESCALE under the SETTINGS menu. 3. Press "ENTER" to begin descaling. The display will show EXPOSURE PHASE on the first line and 10:00 on the second line, and the countdown to 0:00 begins. At this point DESCALE PHASE is displayed, and with a time of 20 minutes. At the end of the descaling phase, the countdown is suspended and a beep will sound. The display will show CLEAN DISH, FILL TANK on the first line and AND WIPE OUT OVEN on the second line. First Rinse Cycle 1. Remove the water tank and wash it out thoroughly, fill it with water and slide it back in. 2. Using the cleaning sponge provided with your range (or a comparable soft cloth or sponge), wipe any water out of the evaporator dish and wipe out the oven. Thoroughly wash out the cleaning sponge. 3. The display will now show PRESS ENTER BUTTON. Press "ENTER" to start the first rinse cycle. The display will show 1ST RINSE on the first line. The countdown will resume. 4. After 20 seconds, a beep will signal the end of the first rinsing cycle. The display will show CLEAN DISH on the first line and PRESS ENTER BUTTON on the second line. 5. Using the cleaning sponge, wipe any water out of the evaporator dish. Second Rinse Cycle 1. Press "ENTER" to start the second rinse cycle. The display will show 2ND RINSE on the first line. The countdown will resume again. 2. After 20 seconds, a beep will signal the end of DESCALE. The display will show DESCALE FINISHED on the first line and CLEAN DISH on the second line. 3. Using the cleaning sponge, wipe any water out of the evaporator dish and wipe out the oven. Thoroughly rinse out the cleaning sponge. 4. Using a soft cloth, dry the oven cavity. Cleaning the Rack Rail Frames The rack rail frames can be removed for cleaning. 1 1 2 2 Pull the rack rail frame toward you and remove. Use dishwashing soap and a kitchen sponge or brush to clean the rack rail frames. The rack rail frames can also be washed in the dishwasher. Installing the Rack Rail Frames Hang the back and front parts of the frame and then push it back until it locks into place. Each rack rail frame only fits on one side. English 89