Thermador PRD48JDSGU Use and Care Manual - Page 90
Do-It-Yourself Maintenance
![]() |
View all Thermador PRD48JDSGU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
Do-It-Yourself Maintenance Replacing the Light Bulb in the Main Oven CAUTION: Before replacing the light bulb, be certain the Oven Light Switch is in the OFF position. Let bulb and cover cool completely before touching. If the light bulb glass comes loose from the base, turn the power to the oven OFF at the circuit breaker panel before attempting to remove the bulb base from the socket. Replace only with a recommended light bulb designed for appliance oven use. DO NOT USE a standard household light bulb in any oven. Call THERMADOR® Customer Care Center at 1-800-735-4328 or your nearest THERMADOR® dealer to determine the proper replacement bulb for your range. You will need to know your range's serial number. To Replace the Light Bulb: 1. Make sure that oven light switch is in the OFF position. 2. Remove the light cover: With a flat-blade screwdriver in one hand, use the screwdriver as a small wedge to gently pry apart the glass cover from the metal housing and hold the glass in the other hand as it releases from the housing. 3. Remove the burned-out bulb. Replace it with a recommended appliance light bulb only. DO NOT touch bulb with fingers. Follow the bulb manufacturer's instructions. 4. Replace the glass cover by aligning it with the housing and pressing on both ends of the glass, with equal force, until the cover snaps into position. Avoid applying excessive force on the glass. WARNING: • Make sure the appliance and lights are cool and power to the appliance has been turned off before replacing the light bulb(s). Failure to do so could result in electrical shock or burns. • The covers must be in place when using the appliance. • The covers serve to protect the light bulb from breaking. • The covers are made of glass. Handle carefully to avoid breaking. Broken glass could cause an injury. • The light socket is live when the door is open. Always use a dry cloth to remove the halogen bulb from its packaging, otherwise the life of the bulb will be shortened. 1. Turn off power to the appliance at the main power supply (fuse or breaker box) or unplug the power cord. 2. Turn the cover to the left to remove. 3. Remove the bulb and replace with the same type of bulb. 4. Slip the new seals and tension ring onto the glass cover. Replacing the Light Bulb in the Steam Oven Heat-resistant 230V / 25 Watt halogen bulbs with seals can be purchased through retail stores or customer service. purchasing through customer service provide the appliance model and serial numbers. 5. Screw the glass cover with seals back on. 6. Reconnect the appliance to power and reset the clock. Never operate the appliance without the glass cover or seals. Replacing the Glass Cover or Seals Damaged glass covers or seals must be replaced. Provide customer service with the appliance model and serial numbers. English 86
![](/manual_guide/products/thermador-prd48jdsgu-use-care-manual-e47e2fc/90.png)