Toshiba Satellite A100-S2311TD User Manual - Page 135
i.LINK (IEEE1394), Precautions
View all Toshiba Satellite A100-S2311TD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 135 highlights
Optional Devices 2. Use a video cable (not supplied) to connect the television to the video out port. VIDEO out port Connecting a television 3. Turn the television on. 4. Turn the computer on. i.LINK (IEEE1394) Some models are equipped with a i.LINK. i.LINK (IEEE1394) is used for high-speed data transfer for a range of compatible devices such as 1. Digital video cameras 2. Hard disk drives 3. MO drives 4. CD-RW drives i.LINK uses a four-pin connector, which does not carry electriccurrent. External devices will need their own power supply. Precautions 1. Make a back-up of your data before transferring it to the computer. There is a possibility that the original data will be damaged. There is a particular risk that some frames will be deleted in the case of digital video transfer. TOSHIBA assumes no liability for such loss of data. 2. Do not transfer data in areas where static electricity is easily generated or in areas subjected to electronic noise. Data can be destroyed. 3. If you are transferring data through an IEEE1394 hub, do not connect or disconnect other devices from the hub during data transfer. There is a likelihood that data will be damaged. Connect all devices to the hub before you turn on the computer's power. 4. You may not use any copyrighted video or music data copied from a video camera except for your personal enjoyment. 5. If you connect/disconnect an i.LINK device to/from another i.LINK device that is currently exchanging data with the computer, data frames might be dropped. User's Manual 8-11