Yamaha CLP-470 Owner's Manual - Page 46

AUX IN [L/L+R][R] jacks, Sound output condition from the instrument

Get Yamaha CLP-470 PDF manuals and user guides View all Yamaha CLP-470 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 46 highlights

NOTICE When the Clavinova's AUX OUT jacks are connected to an external audio system, first turn on the power to the Clavinova, then to the external audio system. Reverse this order when you turn the power off. Clavinova AUX OUT Powered speaker R L/L+R AUX OUT Phone plug (standard) AUX IN Phone plug (standard) Cable The sound condition output from the internal speakers and the headphones changes automatically to the appropriate settings depending on how the external device is connected to the AUX OUT jacks (see chart below). NOTE Use cables and plugs with no resistance. NOTE Do not route the output from the [AUX OUT] jacks to the [AUX IN] jacks. If you make this connection, the signal input at the [AUX IN] jacks is output from the [AUX OUT] jacks. These connections could result in a feedback loop that will make normal performance impossible, and may even damage both pieces of equipment. NOTE If you want to take a mono signal via the AUX OUT jack, connect a cable to the [L/L+R] jack. Sound output condition from the instrument Speakers sound Speakers do not sound No plugs to connected to AUX OUT jacks Plugs connected to AUX OUT jacks SPEAKER: ON SPEAKER: NORMAL SPEAKER: OFF SPEAKER: ON SPEAKER: NORMAL SPEAKER: OFF Headphones connected Optimum equalization for speakers applied* Flat Flat Flat* Flat Flat Headphones not connected Optimum equalization for speakers applied Optimum equalization for speakers applied Flat Flat* Flat* Flat * The output level of the headphones and AUX OUT is lowered.  AUX IN [L/L+R][R] jacks The stereo outputs from another instrument can be connected to these jacks, allowing the sound of an external instrument to be reproduced via the Clavinova's speakers. Refer to the diagram below and use audio cables to make the connections. NOTICE When the Clavinova's AUX IN jacks are connected to an external device, first turn on the power to the external device, then to the Clavinova. Reverse this order when you turn the power off. NOTE The Clavinova's [MASTER VOLUME] slider setting affects the input signal from the AUX IN jacks, but the [BRILLIANCE], [REVERB], and [EFFECT] settings do not. NOTE If you connect the Clavinova to a monaural device, use only the AUX IN [L/L+R] jack. Clavinova Phone plug (standard) Phone plug (standard) AUX IN Cable AUX OUT Tone Generator Phone plug (standard) AUX IN Cable Stereo phone plug (standard) OUTPUT Tone Generator 46 Advanced Functions Connections

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
46
Advanced Functions
Connections
NOTICE
When the Clavinova’s AUX OUT jacks are connected to an external audio system, first turn on
the power to the Clavinova, then to the external audio system. Reverse this order when you turn
the power off.
The sound condition output from the internal speakers and the headphones
changes automatically to the appropriate settings depending on how the external
device is connected to the AUX OUT jacks (see chart below).
* The output level of the headphones and AUX OUT is lowered.
5
AUX IN [L/L+R][R] jacks
The stereo outputs from another instrument can be connected to these
jacks, allowing the sound of an external instrument to be reproduced via
the Clavinova’s speakers. Refer to the diagram below and use audio cables
to make the connections.
NOTICE
When the Clavinova’s AUX IN jacks are connected to an external device, first turn on the power
to the external device, then to the Clavinova. Reverse this order when you turn the power off.
NOTE
Use cables and plugs with no
resistance.
NOTE
Do not route the output from the
[AUX OUT] jacks to the [AUX IN]
jacks. If you make this
connection, the signal input at the
[AUX IN] jacks is output from the
[AUX OUT] jacks. These
connections could result in a
feedback loop that will make
normal performance impossible,
and may even damage both
pieces of equipment.
NOTE
If you want to take a mono signal
via the AUX OUT jack, connect a
cable to the [L/L+R] jack.
L/L+R
R
AUX
OUT
Clavinova
Powered speaker
AUX OUT
AUX IN
Phone plug
(standard)
Phone plug
(standard)
Cable
Sound output condition from the instrument
Speakers sound
Speakers do not sound
No plugs to connected to AUX OUT jacks
Plugs connected to AUX OUT jacks
SPEAKER: ON
SPEAKER:
NORMAL
SPEAKER: OFF
SPEAKER: ON
SPEAKER:
NORMAL
SPEAKER: OFF
Headphones
connected
Optimum
equalization for
speakers applied*
Flat
Flat
Flat*
Flat
Flat
Headphones
not connected
Optimum
equalization for
speakers applied
Optimum
equalization for
speakers applied
Flat
Flat*
Flat*
Flat
NOTE
The Clavinova’s [MASTER
VOLUME] slider setting affects
the input signal from the AUX IN
jacks, but the [BRILLIANCE],
[REVERB], and [EFFECT] settings
do not.
NOTE
If you connect the Clavinova to a
monaural device, use only the
AUX IN [L/L+R] jack.
AUX IN
AUX OUT
AUX IN
OUTPUT
Clavinova
Phone plug
(standard)
Phone plug
(standard)
Tone
Generator
Phone plug
(standard)
Cable
Cable
Tone
Generator
Stereo phone plug
(standard)