Yamaha CLP-470 Owner's Manual - Page 81
Attach D to E and F., Mount B., Secure lower end of C using three thin screws
View all Yamaha CLP-470 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
1. Attach D to E and F. 1-1 Attach D to E and F by using four long screws (6 x 25 mm). 1-2 Remove the twist tie from the folded pedal cord. 1-1 E 1-2 D F 2. Mount B. 2-1 Insert B between E and F as shown in the illustration. 2-2 2-2 B 2-1-2 E 2-1-1 F 2-2 Place B onto the brackets. 2-3 Secure B using four 4 x 16mm thin screws from the front. CAUTION Do not touch the speakers attached to B. 2-3 3. Mount C. 3-1 Attach the C from the front. 3-2 3-1-1 C 3-1-2 F E 3-3 3-2 Secure upper end of C using two long screws (6 x 25 mm) from the rear. 3-3 Secure lower end of C using three thin screws (4 x 16 mm) from the rear. 4. Mount A. 4-1 Place your hands at least 15 cm from either end of A to mount it. 15cm E A 15cm F 4-2 Slide the guide pins on each side of A into the guide slots on E and F respectively. CAUTION Be extra careful not to drop or let your fingers be pinched by the main unit. CAUTION Do not hold the main unit in any position other than the position specified above. Appendix 81 Assembling the Clavinova