Yamaha CLP-470 Owner's Manual - Page 69
Assembling the Clavinova - review
View all Yamaha CLP-470 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
Assembling the Clavinova Assembly Precautions CAUTION • Assemble the unit on a hard and flat floor with ample space. • Be careful not to confuse parts, and be sure to install all parts in the correct orientation. Please assemble the unit in accordance with the sequence given below. • Assembly should be carried out by at least two persons. • Be sure to use only the included screws of the specified sizes. Do not use any other screws. Use of incorrect screws can cause damage or malfunction of the product. • Be sure to tighten all screws upon completing assembly of the unit. • To disassemble the unit, reverse the assembly sequence given below. Have a Philips-head (+) screwdriver of the appropriate size ready. After completing the assembly, please check the following. • Are there any parts left over? Review the assembly procedure and correct any errors. • Is the instrument clear of doors and other movable fixtures? Move the instrument to an appropriate location. • Does the instrument make a rattling noise when you shake it? Tighten all screws. • Does the pedal box rattle or give way when you step on the pedals? Turn the adjuster so that it is set firmly against the floor. • Are the pedal and power cords inserted securely into the sockets? Check the connection. • If the unit creaks or is otherwise unsteady when you play on the keyboard, refer to the assembly diagrams and retighten all screws. 470 440 430 S408 S406 465GP CAUTION When moving the instrument after assembly, always hold the bottom of the main unit. (On the CLP-470: Hold by the bottom front of the main unit and the handles on the rear panel.) Do not hold the key cover or top portion. Improper handling can result in damage to the instrument or personal injury. Do not hold here Hold here. 470 440 430 S408 S406 465GP CAUTION When moving the instrument after assembly, hold the instrument by the bottom front of the main unit and the handles on the rear panel. Do not hold the key cover or top portion. Improper handling can result in damage to the instrument or personal injury. Hold here Do not hold here NOTICE When transporting the instrument, cover the entire keyboard with the protective sheet (pages 76, 80) before closing the key cover. The sheet will protect the keyboard from being scratched. 470 440 430 S408 S406 465GP When moving the instrument after assembly, always hold the bottom of the main unit. CAUTION Do not hold the key cover or top portion. Improper handling can result in damage to the instrument or personal injury Do not hold here Do not hold here Hold here Reference page CLP-470 70 CLP-440/430 73 CLP-S408 76 CLP-S406 80 CLP-465GP 84 Appendix 69 Assembling the Clavinova