Yamaha CLP-470 Owner's Manual - Page 82
Mount G., Attach A., Connect the speaker cord.
View all Yamaha CLP-470 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
5. Attach A. 5-1 Adjust the position of A so that the left and right ends of A will project beyond E and F equally (as seen from the rear). 5-1 5-2 A 7. Connect the pedal cord. 7-1 Insert the pedal cord plug into the [PEDAL] connector. 7-2 Attach the cord holders to the instrument as shown, then clip the cord into the holders. At this time, be careful not to allow too much slack in the pedal cord between the plug and cord holder. 7-1 5-3 5-2 Secure A using two 6 x 16mm short screws from the rear. 5-3 Secure A using four 6 x 16mm short screws from the front. 6. Connect the speaker cord. Insert the speaker cord plug into the connector so that the protruding tab on the plug faces toward right when viewed from the rear. 7-2 Insert the pedal cord E securely until the metal part of the cord plug disappears from view. Otherwise, the pedal may not function properly. 8. Mount G. Secure G using four thin screws (4 x 16 mm). 8 G 82 Appendix Assembling the Clavinova