Yamaha CLP-470 Owner's Manual - Page 58

Program Change ON/OFF 470 440 430 S408 S406 465GP 470 440 430 S408 S406 465GP Normally this instrument responds to MIDI program change numbers received from an external keyboard or other MIDI device, causing the correspondinglynumbered Voice to be selected on the corresponding channel (the keyboard Voice does not change). The instrument will normally also send a MIDI program change number whenever one of its Voices is selected, causing the correspondingly-numbered Voice or program to be selected on the external MIDI device if the device is set up to receive and respond to MIDI program change numbers. This function makes it possible to cancel program change number reception and transmission so that Voices can be selected on the instrument without affecting the external MIDI device. NOTE For information on program change numbers for each of the instrument's Voices, refer to the online manual "MIDI Data Format." Setting range: ON/OFF Default setting: ON Control Change ON/OFF 470 440 430 S408 S406 465GP 470 440 430 S408 S406 465GP Normally this instrument responds to MIDI control change data received from an external MIDI device or keyboard, causing the Voice on the corresponding channel to be affected by pedal and other "control" settings received from the controlling device (the keyboard Voice is not affected). The instrument also transmits MIDI control change information when the pedal or other appropriate controls are operated. This function makes it possible to cancel control change data reception and transmission so that, for example, the instrument's pedal and other controls can be operated without affecting an external MIDI device. NOTE For information on control change messages that can be used with this instrument, refer to the online manual "MIDI Data Format." Setting range: ON/OFF Default setting: ON Initial Setup Send 470 440 430 S408 S406 465GP 470 440 430 S408 S406 465GP This function lets you send the data of the panel settings to a computer. By transmitting the panel settings and recording them on the MIDI sequence recorder prior to the actual performance data, the instrument will be automatically restored to the same settings when the performance is played back. You can also use this function to change the settings of a connected tone generator to the same settings as the instrument. 1. Set up the panel controls as desired. 2. Connect the Clavinova to a sequencer via MIDI, and set up the sequencer so it can receive the setup data. 3. Call up the Function mode and select the function number. 4. Press the [+/YES] button to transmit the panel/ status data. will appear on the display when the data has been successfully transmitted. The following data can be sent. • Voice • [REVERB] type/depth • [EFFECT] type/depth • (CLP-470/440/S408/S406) Split point • Scale • Dual Balance • Dual Detune • (CLP-470/440/S408/S406) Split Balance • Damper Resonance Depth (CLP-470/440/S408/S406)/ (CLP-430/465GP) • Soft Pedal Effect Depth (CLP-470/440/S408/S406)/ (CLP-430/465GP) • (CLP-470/440/S408/S406) String Resonance Depth • (CLP-470/440/S408/S406) Sustain Sample Depth • (CLP-470/440/S408/S406) Keyoff Sample Volume 58 Detailed Settings Function Parameters - Various Convenient Settings