ZyXEL WAP3205 User Guide - Page 113

Sys Op Mode Screen

Page 113 highlights

Figure 84 Universal Repeater Mode Chapter 12 Maintenance 12.10 Sys Op Mode Screen Use this screen to select how you want to use your WAP3205. Figure 85 Maintenance > Sys OP Mode The following table describes the labels in the General screen. Table 48 Maintenance > Sys OP Mode LABEL DESCRIPTION System Operation Mode Access Point Select Access Point Mode if your device bridges traffic between clients on the same network. Client Mode • In Access Point mode all Ethernet ports have the same IP address. • The default IP address of the device on the local network is 192.168.1.2. Select Client Mode if your device needs a wireless client to connect to an existing access point. Universal Repeater Mode • You cannot configure wireless LAN settings like MAC filtering, QoS, WDS and scheduling in the client mode. • The IP address of the device on the local network is the same as the IP address given to the WAP3205 while in access point mode (default is 192.168.1.2). Select Universal Repeater Mode if you want to have wireless clients associate with the WAP3205 and also want to connect the WAP3205 to an existing access point. • In addition to wireless LAN settings between the WAP3205 and wireless clients, you also need to configure security and wireless settings between the WAP3205 and another access point. • WDS is not available when the WAP3205 is in universal repeater mode. • The IP address of the device on the local network is the same as the IP address given to the WAP3205 while in access point mode (default is 192.168.1.2). WAP3205 User's Guide 113

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196

Chapter 12 Maintenance
WAP3205 User’s Guide
113
Figure 84
Universal Repeater Mode
12.10
Sys Op Mode Screen
Use this screen to select how you want to use your WAP3205.
Figure 85
Maintenance > Sys OP Mode
The following table describes the labels in the
General
screen.
Table 48
Maintenance > Sys OP Mode
LABEL
DESCRIPTION
System Operation Mode
Access Point
Select
Access Point Mode
if your device bridges traffic between clients on the
same network.
In Access Point mode all Ethernet ports have the same IP address.
The default IP address of the device on the local network is
192.168.1.2.
Client Mode
Select
Client Mode
if your device needs a wireless client to connect to an existing
access point.
You cannot configure wireless LAN settings like MAC filtering, QoS, WDS and
scheduling in the client mode.
The IP address of the device on the local network is the same as the IP address
given to the WAP3205 while in access point mode (default is 192.168.1.2).
Universal
Repeater Mode
Select
Universal Repeater Mode
if you want to have wireless clients associate
with the WAP3205 and also want to connect the WAP3205 to an existing access
point.
In addition to wireless LAN settings between the WAP3205 and wireless clients,
you also need to configure security and wireless settings between the WAP3205
and another access point.
WDS is not available when the WAP3205 is in universal repeater mode.
The IP address of the device on the local network is the same as the IP address
given to the WAP3205 while in access point mode (default is 192.168.1.2).