ZyXEL WAP3205 User Guide - Page 83
WLAN Station Status
View all ZyXEL WAP3205 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
Figure 57 Summary: Packet Statistics Chapter 9 Monitor The following table describes the labels in this screen. Table 27 Summary: Packet Statistics LABEL Port Status DESCRIPTION This is the WAP3205's port type. For the LAN ports, this displays the port speed or Down when the line is disconnected. TxPkts RxPkts Collisions Tx B/s Rx B/s Up Time System Up Time Poll Interval(s) Set Interval Stop For the WLAN, it displays the maximum transmission rate when the WLAN is enabled and Down when the WLAN is disabled. This is the number of transmitted packets on this port. This is the number of received packets on this port. This is the number of collisions on this port. This displays the transmission speed in bytes per second on this port. This displays the reception speed in bytes per second on this port. This is the total time the WAP3205 has been for each session. This is the total time the WAP3205 has been on. Enter the time interval in seconds for refreshing statistics in this field. Click this button to apply the new poll interval you entered in the Poll Interval(s) field. Click Stop to stop refreshing statistics. 9.5 WLAN Station Status Click the WLAN Station Status (Details...) hyperlink in the Status screen or Monitor > WLAN Station Status. View the wireless stations that are currently associated to the WAP3205 in the Association List. Association means that a wireless client (for example, your network or computer with a wireless network card) has connected successfully to the AP (or wireless router) using the same SSID, channel and security settings. Note: This screen is not available when the WAP3205 is in Client mode. WAP3205 User's Guide 83