ZyXEL WAP3205 User Guide - Page 99
Network, Wireless LAN, Basic Setting, Disabled, Security Mode, No Security, Table 40, LABEL
View all ZyXEL WAP3205 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
Chapter 10 Wireless LAN Note: You must enable the same wireless security settings on the WAP3205 and on all wireless clients that you want to associate with it. Click Network > Wireless LAN > WDS tab. The following screen opens with the Basic Setting set to Disabled, and Security Mode set to No Security. Figure 70 Network > Wireless LAN > WDS The following table describes the labels in this screen. Table 40 Network > Wireless LAN > WDS LABEL WDS Setup Basic Settings DESCRIPTION Select the operating mode for your WAP3205. Local MAC Address Phy Mode • Disable - The WAP3205 works as an access point only and cannot establish wireless links with other APs. • AP + Bridge - The WAP3205 functions as a bridge and access point simultaneously. • Bridge - The WAP3205 acts as a wireless network bridge and establishes wireless links with other APs. You need to know the MAC address of the peer device, which also must be in bridge mode. The WAP3205 can establish up to five wireless links with other APs. This is the MAC address of your WAP3205. Select the Phy mode you want the WAP3205 to use. This dictates the maximum size of packets during data transmission. Remote MAC Address This field is not available when you select Disable in the Basic Setting field. This is the MAC address of the peer device that your WAP3205 wants to make a bridge connection with. Security EncrypType You can connect to up to 4 peer devices. Select whether to use WEP, TKIP or AES encryption for your WDS connection in this field. EncrypKey Otherwise, select No Security. The Encryp key is used to encrypt data. Peers must use the same key for data transmission. WAP3205 User's Guide 99