Home » ZyXEL Manuals » Wireless » ZyXEL WAP3205 » Manual Viewer

ZyXEL WAP3205 User Guide - Page 60

Push Button Configuration (PBC), PIN Configuration, Start, Push Button, Network, Wireless Client

Add to My Manuals
Save this manual to your list of manuals

Page 60 highlights

Chapter 8 Tutorials Note: The wireless client must be a WPS-aware device (for example, a WPS USB adapter or PCI card). There are two WPS methods for creating a secure connection. This tutorial shows you how to do both. • Push Button Configuration (PBC) - create a secure wireless network simply by pressing a button. See Section 8.3.1 on page 60.This is the easier method. • PIN Configuration - create a secure wireless network simply by entering a wireless client's PIN (Personal Identification Number) in the WAP3205's interface. See Section 8.3.2 on page 61. This is the more secure method, since one device can authenticate the other. 8.3.1 Push Button Configuration (PBC) 1 Make sure that your WAP3205 is turned on and that it is within range of your computer. 2 Make sure that you have installed the wireless client (this example uses the NWD-211AN) driver and utility in your notebook. 3 In the wireless client utility, find the WPS settings. Enable WPS and press the WPS button (Start or WPS button) 4 Log into WAP3205's Web Configurator and press the Push Button button in the Network > Wireless Client > WPS Station screen. Note: Your WAP3205 has a WPS button located on its panel, as well as a WPS button in its configuration utility. Both buttons have exactly the same function; you can use one or the other. Note: It doesn't matter which button is pressed first. You must press the second button within two minutes of pressing the first one. The WAP3205 sends the proper configuration settings to the wireless client. This may take up to two minutes. Then the wireless client is able to communicate with the WAP3205 securely. The following figure shows you how to set up wireless network and security by pressing a button on both WAP3205 and wireless client (the NWD-211AN in this example). 60 WAP3205 User's Guide

Section	Page
WAP3205	1
Contents Overview	3
Table of Contents	5
User’s Guide	9
Getting to Know Your WAP3205	11
1.1 Overview	11
1.2 Applications	11
1.3 Ways to Manage the WAP3205	11
1.4 Good Habits for Managing the WAP3205	12
1.5 LEDs	12
1.6 Wall Mounting	13
WAP3205 Modes	15
2.1 Overview	15
2.1.1 Device Modes	15
Access Point Mode	17
3.1 Overview	17
3.2 What You Can Do	17
3.3 What You Need to Know	17
3.3.1 Setting your WAP3205 to AP Mode	17
3.3.2 Configuring your WLAN, LAN and Maintenance Settings	18
3.4 AP Mode Status Screen	18
Client Mode	23
4.1 Overview	23
4.2 What You Can Do	23
4.3 What You Need to Know	23
4.4 Setting your WAP3205 to Client Mode	24
4.5 Client Mode Status Screen	24
4.6 Wireless LAN Profile Screen	26
4.6.1 Adding a New WLAN Profile	27
4.7 Site Survey Screen	31
4.8 WPS Screen	32
Universal Repeater Mode	35
5.1 Overview	35
5.2 What You Can Do	35
5.3 What You Need to Know	36
5.4 Setting your WAP3205 to Universal Repeater Mode	36
5.5 Universal Repeater Mode Status Screen	36
5.6 Universal Repeater Screen	39
5.6.1 No Security	39
5.6.2 Static WEP	40
5.6.3 WPA(2)-PSK	41
Introducing the Web Configurator	43
6.1 Overview	43
6.2 Accessing the Web Configurator	43
6.2.1 Login Screen	43
6.2.2 Password Screen	44
6.2.3 Home Screen	45
6.3 Resetting the WAP3205	47
6.3.1 Procedure to Use the Reset Button	47
Connection Wizard	49
7.1 Overview	49
7.2 Accessing the Wizard	49
7.2.1 Device Password	49
7.2.2 Operation Mode	50
7.2.3 Wireless Configuration	50
Tutorials	59
8.1 Overview	59
8.2 Connecting to the Internet from an Access Point	59
8.3 Configuring Wireless Security Using WPS	59
8.3.1 Push Button Configuration (PBC)	60
8.3.2 PIN Configuration	61
8.4 Enabling and Configuring Wireless Security (No WPS)	62
8.4.1 Configure Your Notebook	64
8.5 Using Multiple SSIDs on the WAP3205	66
8.5.1 Configuring Security Settings of Multiple SSIDs	67
8.6 Connecting the WAP3205 (in Universal Repeater Mode) to an AP or Wireless Router	70
8.7 Connecting the WAP3205 (in Client Mode) to an AP or Wireless Router	74
8.7.1 Connecting to a Wireless Network Using Site Survey	74
8.7.2 Connecting to a Wireless Network Using a Profile	76
8.7.3 Deploying the WAP3205 in your Network	77
Technical Reference	79
Monitor	81
9.1 Overview	81
9.2 What You Can Do	81
9.3 Log	81
9.4 Packet Statistics	82
9.5 WLAN Station Status	83
Wireless LAN	85
10.1 Overview	85
10.2 What You Can Do	85
10.3 What You Should Know	86
10.3.1 Wireless Security Overview	86
10.4 General Wireless LAN Screen	88
10.5 Wireless Security Screen	89
10.5.1 No Security	89
10.5.2 WEP Encryption	90
10.5.3 WPA-PSK/WPA2-PSK	92
10.6 MAC Filter	93
10.7 Wireless LAN Advanced Screen	94
10.8 Quality of Service (QoS) Screen	95
10.9 WPS Screen	96
10.10 WPS Station Screen	97
10.11 Scheduling Screen	97
10.12 WDS Screen	98
LAN	101
11.1 Overview	101
11.2 What You Can Do	101
11.3 What You Need To Know	101
11.3.1 LAN TCP/IP	102
11.3.2 IP Alias	102
11.4 LAN IP Screen	102
11.5 IP Alias Screen	103
Maintenance	105
12.1 Overview	105
12.2 What You Can Do	105
12.3 General Screen	105
12.4 Password Screen	106
12.5 Time Setting Screen	107
12.6 Firmware Upgrade Screen	109
12.7 Configuration Backup/Restore Screen	110
12.8 Reset/Restart Screen	111
12.9 System Operation Mode Overview	112
12.10 Sys Op Mode Screen	113
Troubleshooting	115
13.1 Power, Hardware Connections, and LEDs	115
13.2 WAP3205 Access and Login	116
13.3 Internet Access	117
13.4 Resetting the WAP3205 to Its Factory Defaults	118
13.5 Wireless Router/AP Troubleshooting	119
Pop-up Windows, JavaScripts and Java Permissions	121
IP Addresses and Subnetting	131
Setting Up Your Computer’s IP Address	141
Wireless LANs	169
Common Services	183
Legal Information	187

Match case Limit results 1 per page

Chapter 8 Tutorials

WAP3205 User’s Guide

Note: The wireless client must be a WPS-aware device (for example, a WPS USB adapter

or PCI card).

There are two WPS methods for creating a secure connection. This tutorial shows you how to do

both.

•

Push Button Configuration (PBC)

- create a secure wireless network simply by pressing a

button. See

Section 8.3.1 on page 60

.This is the easier method.

•

PIN Configuration

- create a secure wireless network simply by entering a wireless client's PIN

(Personal Identification Number) in the WAP3205’s interface. See

Section 8.3.2 on page 61

. This

is the more secure method, since one device can authenticate the other.

8.3.1

Push Button Configuration (PBC)

Make sure that your WAP3205 is turned on and that it is within range of your computer.

Make sure that you have installed the wireless client (this example uses the NWD-211AN) driver

and utility in your notebook.

In the wireless client utility, find the WPS settings. Enable WPS and press the WPS button (

Start

WPS

button)

Log into WAP3205’s Web Configurator and press the

Push Button

button in the

Network

Wireless Client

WPS Station

screen.

Note: Your WAP3205 has a WPS button located on its panel, as well as a WPS button in

its configuration utility. Both buttons have exactly the same function; you can use

one or the other.

Note: It doesn’t matter which button is pressed first. You must press the second button

within two minutes of pressing the first one.

The WAP3205 sends the proper configuration settings to the wireless client. This may take up to

two minutes. Then the wireless client is able to communicate with the WAP3205 securely.

The following figure shows you how to set up wireless network and security by pressing a button on

both WAP3205 and wireless client (the NWD-211AN in this example).