Home » ZyXEL Manuals » Wireless » ZyXEL WAP3205 » Manual Viewer

ZyXEL WAP3205 User Guide - Page 116

WAP3205 Access and Login - configuration not pop up

Add to My Manuals
Save this manual to your list of manuals

Page 116 highlights

Chapter 13 Troubleshooting 13.2 WAP3205 Access and Login I don't know the IP address of my WAP3205. 1 The default IP address is 192.168.1.2. 2 If you changed the IP address and have forgotten it, • and your WAP3205 is a DHCP client, you can find your IP address from the DHCP server. This information is only available from the DHCP server which allocates IP addresses on your network. Find this information directly from the DHCP server or contact your system administrator for more information. • reset your WAP3205 to change all settings back to their default. This means your current settings are lost. See Section 13.4 on page 118 in the Troubleshooting for information on resetting your WAP3205. I forgot the password. 1 The default password is 1234. 2 If this does not work, you have to reset the device to its factory defaults. See Section 13.4 on page 118. I cannot see or access the Login screen in the Web Configurator. 1 Make sure you are using the correct IP address. • The default IP address is 192.168.1.2. • If you changed the IP address (Section 11.4 on page 102), use the new IP address. • If you changed the IP address and have forgotten it, see the troubleshooting suggestions for I don't know the IP address of my WAP3205. 2 Check the hardware connections, and make sure the LEDs are behaving as expected. See the Quick Start Guide. 3 Make sure your Internet browser does not block pop-up windows and has JavaScripts and Java enabled. See Appendix A on page 121. 4 Make sure your computer is in the same subnet as the WAP3205. (If you know that there are routers between your computer and the WAP3205, skip this step.) • If there is a DHCP server on your network, make sure your computer is using a dynamic IP address. See Section 11.4 on page 102. • If there is no DHCP server on your network, make sure your computer's IP address is in the same subnet as the WAP3205. See Appendix B on page 131. 116 WAP3205 User's Guide

Section	Page
WAP3205	1
Contents Overview	3
Table of Contents	5
User’s Guide	9
Getting to Know Your WAP3205	11
1.1 Overview	11
1.2 Applications	11
1.3 Ways to Manage the WAP3205	11
1.4 Good Habits for Managing the WAP3205	12
1.5 LEDs	12
1.6 Wall Mounting	13
WAP3205 Modes	15
2.1 Overview	15
2.1.1 Device Modes	15
Access Point Mode	17
3.1 Overview	17
3.2 What You Can Do	17
3.3 What You Need to Know	17
3.3.1 Setting your WAP3205 to AP Mode	17
3.3.2 Configuring your WLAN, LAN and Maintenance Settings	18
3.4 AP Mode Status Screen	18
Client Mode	23
4.1 Overview	23
4.2 What You Can Do	23
4.3 What You Need to Know	23
4.4 Setting your WAP3205 to Client Mode	24
4.5 Client Mode Status Screen	24
4.6 Wireless LAN Profile Screen	26
4.6.1 Adding a New WLAN Profile	27
4.7 Site Survey Screen	31
4.8 WPS Screen	32
Universal Repeater Mode	35
5.1 Overview	35
5.2 What You Can Do	35
5.3 What You Need to Know	36
5.4 Setting your WAP3205 to Universal Repeater Mode	36
5.5 Universal Repeater Mode Status Screen	36
5.6 Universal Repeater Screen	39
5.6.1 No Security	39
5.6.2 Static WEP	40
5.6.3 WPA(2)-PSK	41
Introducing the Web Configurator	43
6.1 Overview	43
6.2 Accessing the Web Configurator	43
6.2.1 Login Screen	43
6.2.2 Password Screen	44
6.2.3 Home Screen	45
6.3 Resetting the WAP3205	47
6.3.1 Procedure to Use the Reset Button	47
Connection Wizard	49
7.1 Overview	49
7.2 Accessing the Wizard	49
7.2.1 Device Password	49
7.2.2 Operation Mode	50
7.2.3 Wireless Configuration	50
Tutorials	59
8.1 Overview	59
8.2 Connecting to the Internet from an Access Point	59
8.3 Configuring Wireless Security Using WPS	59
8.3.1 Push Button Configuration (PBC)	60
8.3.2 PIN Configuration	61
8.4 Enabling and Configuring Wireless Security (No WPS)	62
8.4.1 Configure Your Notebook	64
8.5 Using Multiple SSIDs on the WAP3205	66
8.5.1 Configuring Security Settings of Multiple SSIDs	67
8.6 Connecting the WAP3205 (in Universal Repeater Mode) to an AP or Wireless Router	70
8.7 Connecting the WAP3205 (in Client Mode) to an AP or Wireless Router	74
8.7.1 Connecting to a Wireless Network Using Site Survey	74
8.7.2 Connecting to a Wireless Network Using a Profile	76
8.7.3 Deploying the WAP3205 in your Network	77
Technical Reference	79
Monitor	81
9.1 Overview	81
9.2 What You Can Do	81
9.3 Log	81
9.4 Packet Statistics	82
9.5 WLAN Station Status	83
Wireless LAN	85
10.1 Overview	85
10.2 What You Can Do	85
10.3 What You Should Know	86
10.3.1 Wireless Security Overview	86
10.4 General Wireless LAN Screen	88
10.5 Wireless Security Screen	89
10.5.1 No Security	89
10.5.2 WEP Encryption	90
10.5.3 WPA-PSK/WPA2-PSK	92
10.6 MAC Filter	93
10.7 Wireless LAN Advanced Screen	94
10.8 Quality of Service (QoS) Screen	95
10.9 WPS Screen	96
10.10 WPS Station Screen	97
10.11 Scheduling Screen	97
10.12 WDS Screen	98
LAN	101
11.1 Overview	101
11.2 What You Can Do	101
11.3 What You Need To Know	101
11.3.1 LAN TCP/IP	102
11.3.2 IP Alias	102
11.4 LAN IP Screen	102
11.5 IP Alias Screen	103
Maintenance	105
12.1 Overview	105
12.2 What You Can Do	105
12.3 General Screen	105
12.4 Password Screen	106
12.5 Time Setting Screen	107
12.6 Firmware Upgrade Screen	109
12.7 Configuration Backup/Restore Screen	110
12.8 Reset/Restart Screen	111
12.9 System Operation Mode Overview	112
12.10 Sys Op Mode Screen	113
Troubleshooting	115
13.1 Power, Hardware Connections, and LEDs	115
13.2 WAP3205 Access and Login	116
13.3 Internet Access	117
13.4 Resetting the WAP3205 to Its Factory Defaults	118
13.5 Wireless Router/AP Troubleshooting	119
Pop-up Windows, JavaScripts and Java Permissions	121
IP Addresses and Subnetting	131
Setting Up Your Computer’s IP Address	141
Wireless LANs	169
Common Services	183
Legal Information	187

Match case Limit results 1 per page

Chapter 13 Troubleshooting

WAP3205 User’s Guide

116

13.2

WAP3205 Access and Login

I don’t know the IP address of my WAP3205.

The default IP address is

192.168.1.2

If you changed the IP address and have forgotten it,

•

and your WAP3205 is a DHCP client, you can find your IP address from the DHCP server. This

information is only available from the DHCP server which allocates IP addresses on your network.

Find this information directly from the DHCP server or contact your system administrator for

more information.

•

reset your WAP3205 to change all settings back to their default. This means your current settings

are lost. See

Section 13.4 on page 118

in the

Troubleshooting

for information on resetting your

WAP3205.

I forgot the password.

The default password is

1234

If this does not work, you have to reset the device to its factory defaults. See

Section 13.4 on page

118

I cannot see or access the

screen in the Web Configurator.

Make sure you are using the correct IP address.

•

The default IP address is

192.168.1.2

•

If you changed the IP address (

Section 11.4 on page 102

), use the new IP address.

•

If you changed the IP address and have forgotten it, see the troubleshooting suggestions for

don’t know the IP address of my WAP3205.

Check the hardware connections, and make sure the LEDs are behaving as expected. See the Quick

Start Guide.

Make sure your Internet browser does not block pop-up windows and has JavaScripts and Java

enabled. See

Appendix A on page 121

Make sure your computer is in the same subnet as the WAP3205. (If you know that there are

routers between your computer and the WAP3205, skip this step.)

•

If there is a DHCP server on your network, make sure your computer is using a dynamic IP

address. See

Section 11.4 on page 102

•

If there is no DHCP server on your network, make sure your computer’s IP address is in the

same subnet as the WAP3205. See

Appendix B on page 131