Brother International DCP-1400 Service Manual - Page 110

1.26 Gears and Paper Pick-up Roller (1) Place the main chassis upside down. (2) Remove the inner gear 54 (by pulling its pawl outwards), gear 45 set P/R, gear 20 P/R, and the bushing from the end of the paper pick-up roller shaft. (3) Remove the pawled bushing by pulling its pawl outwards, then remove the paper pick-up roller and its shaft. (4) Remove the gear 40/54, gear 45 set FIR, and gear 20 FIR. (5) If the engine PCB has been removed, take out the cassette sensor actuator. (This prevents the actuator from dropping during the following disassembly jobs.) Pawled bushing Cassette sensor actuator / Main chassis placed upside down. Paper pick-up roller Paper pick-up roller shaft Gear 20 F/R Gear 45 set F/R / Gear 40/54 Itv (Front) Bushing' Gear 20 P/R Gear 45 set P/R Inner gear 54 IV - 66