Brother International DCP-1400 Service Manual - Page 135

3.9 CCD Scanner Area Setting ■ Function The machine sets the CCD scanner area and stores it into the EEPROM. ■ Operating Procedure (1) Press the 5 key twice in the initial stage of the maintenance mode. The "SCANNER AREA SET," "BLACK LEVEL INIT," and "WHITE LEVEL INIT" will appear on the LCD in this order. The machine checks and sets the area to be scanned. If no error is noted, the machine returns to the initial stage of the maintenance mode. If any error is noted, the "SCANNER ERROR" will appear on the LCD. To return the machine to the initial stage of the maintenance mode, press the Stop key. 3.10 EEPROM Customizing ■ Function This function allows you to customize the EEPROM according to language, function settings, and firmware switch settings. The customizing codes list is given in Appendix 1. NOTE: If you replace the main PCB, be sure to carry out this procedure. ■ Operating Procedure (1) Press the 7 and 4 keys in this order in the initial stage of the maintenance mode. The current customizing code (e.g., 9001 in the case of MFC9700 USA version) appears. (2) Enter the desired customizing code (e.g., 0002 in the case of MFC9800 Canadian version). The newly entered code appears. NOTE: If a wrong 4-digit code is entered, the machine will malfunction. (3) For machines w/ fax: Press the Fax Start key. For machines w/o fax: Press the Sort key. The machine saves the setting and returns to the initial stage of the maintenance mode. If you press the Stop key or no keys are pressed for one minute in the above procedure, the machine stops the procedure and returns to the initial stage of the maintenance mode. V - 16