Brother International DCP-1400 Service Manual - Page 83
thermistor
View all Brother International DCP-1400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
[Disassembling the heat-fixing unit] (1) Remove the three screws and take off the FU front paper guide. (2) Remove the three screws and take off the star wheel holder ASSY. Heat-fixing unit C ~` Screw, bind M3x10 Star wheel holder ASSY FU front paper guide Screw, bind M3x10 (3) Release the heater thermistor harness from the three harness guides provided on the underside of the heat-fixing unit. (4) Remove the two screws from the top of the heat-fixing unit. (5) Unlatch the upper FU frame from the lower one at each of the right and left ends. Taptite, cup B M3x20 Upper side Heat-fixing unit Heater thermistor harness Taptite, cup B M3x20 Latch A - Lower side Harness guide Heat-fixing unit Harness guides Latch Heater thermistor harness IV - 39