Brother International DCP-1400 Service Manual - Page 84
thoroughly
View all Brother International DCP-1400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
(6) Separate the lower FU frame from the upper one. Boss Hook if Upper FU frame Boss Lower FU frame Hook (7) Remove the screw securing the lamp lock plate at the gear side of the upper FU frame. At the other side, loosen the screw. (8) Slightly lift up the right-hand end of the heater roller and pull out the halogen lamp from the heater roller. CAUTION: Do not touch the surface of the halogen lamp. If you have touched it, clean it thoroughly with alcohol. Screw, cup M3x6 (Loosen this.) Halogen lamp Colored end 115V: Yellow 230V: Purple Heater roller 1' '' ill 1 1FI'-- Heater roller Halogen lamp Screw Lamp lock plate Upper FU frame NOTE: When setting the halogen lamp into the heat-fixing unit, be careful with the insertion direction as shown above. IV - 40