Brother International DCP-1400 Service Manual - Page 89
Release, heater, thermistor, harness, guides, provided, upper, frame., remove, screw, thermistor.,
View all Brother International DCP-1400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
(16) Release the heater thermistor harness from the harness guides provided on the upper FU frame. Then remove the screw and take off the thermistor. Harness guides • Thermistor Upper FU frame Taptite, bind B M3x12 NOTE: When setting the thermistor into the upper FU frame, insert it in the direction shown below. Upper FU frame Thermistor Thermistor Taptite, bind B M3x12 IV - 45
(16)
Release
the
heater
thermistor
harness
from
the
harness
guides
provided
on
the
upper
FU
frame.
Then
remove
the
screw
and
take
off
the
thermistor.
Harness
guides
•
Upper
FU
frame
Taptite,
bind
B
M3x12
Thermistor
NOTE:
When
setting
the
thermistor
into
the
upper
FU
frame,
insert
it
in
the
direction
shown
below.
Upper
FU
frame
Thermistor
Taptite,
bind
B
M3x12
IV
-
45
Thermistor