Brother International DCP-1400 Service Manual - Page 58

15) At the front end of the document ejection roller shaft, remove the pawled bushing by pulling its pawls outwards. At the rear end, pull the bushing outwards and lift up the document ejection roller ASSY. 16) Remove the three screws and take off the motor bracket. 17) At the front end of the lower LF roller (black) shaft, remove the pawled bushing by pulling its pawls outwards. At the rear end, pull the bushing outwards and remove the lower LF roller ASSY. Motor bracket Taptite, cup S M3x6 Document ejection roller ASSY Lower ADF chute Lower LF roller ASSY (black) 0 (Front) Pawled bushings 18) Turn the lower ADF chute upside down. 19) Pull the arm outwards and take it off. 20) At the rear side of the lower ADF chute, remove the gear 19/36 by pulling its pawl outwards. 21) Remove the gear 64 by pulling its pawl outwards. 22) Unhook the two springs. 23) Pull out the white roller bushing F by pulling its pawls outwards. 24) Remove the white roller together with the white roller bushing R and gear 27. Gear 64 Gear 27 White roller bushing R Spring -031D' N White roller kJ Gear 19/36 ° Spring / 4 .7) Anti-static brush 0 White roller bushing F Lower ADF chute placed upside down IV - 14 A Arm (Front)