Brother International Innov-is XJ2 Operation Manual - Page 101

MY CUSTOM STITCH  Designing a Stitch By using the MY CUSTOM STITCH function, you can register stitches you have created yourself. You can also sew designs combining MY CUSTOM STITCH creations with built-in characters (page 53). Memo • Stitches that you create with MY CUSTOM STITCH can be a maximum of 7 mm (approx. 9/32 inch) wide and 37 mm (approx. 1-1/3 inches) long. a Draw Place the stitch design points where the on the grid sheet. stitch pattern intersects with the grid, and connect all the points with a line. Memo • Simplify the design so that it can be sewn as a continuous line. For a more attractive stitch, close the design by intersecting lines. If the design is to be repeated and linked, the start point and end point of the design should be at the same height. b Determine the marked points. x and y coordinates of each of the MY CUSTOM STITCH  MY CUSTOM STITCH Screen F E D C 1 B 2 A 3 4 5 6 0 9 8 7 1 This area displays the stitch being created. 2 Displays the number of the present set point over the total number of points in the stitch. 3 Displays the y-coordinate of over the x-coordinate of . Display No. Key Name Explanation Page 4 Touch this key to select whether 100 one or three stitches will be sewn Single/triple between two points. stitching key 5 Touch this key to delete a selected - point. Point delete key 6 Touch this key to exit the entering - stitch data screen. Return key 7 Touch this key to sew a test of the - Test key stitch. 8 Touch this key to store the stitch - being created. MY CUSTOM STITCH memory key 9 Touch this key to group points 100 together and move them together. Block move key 0 Touch this key to insert new points 101 Insert key on the stitch design. A 100-101 Use these keys to move over the display area, and touch the set key in the center to set a point on the stitch design. Arrow keys and set key VARIOUS STITCHES 3 99