Brother International Innov-is XJ2 Operation Manual - Page 88
Start/Stop button.
View all Brother International Innov-is XJ2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
UTILITY STITCHES a Mark the fabric. position and length of the buttonhole on the c a b h Select stitch to sew the bar tack and then press the "Start/Stop" button. The machine will automatically sew off the bar tack tie and stop when the bar tack is complete. i Raise the presser foot and remove the fabric. j Open the buttonhole (page 84). 1 Starting point 2 End point 3 Buttonhole sewing b Attach advanced monogramming foot "N+", and select stitch to sew the left side of the buttonhole. c Press the "Start/Stop" button to start sewing. d Sew the desired length for the "Start/Stop" button again. buttonhole and press the e Select stitch to sew the bar tack and press the "Start/Stop" button. The machine will automatically stop after sewing the bar tack. f Select stitch to sew the right side of the buttonhole, and press the "Start/Stop" button to begin sewing. g Sew the right side of the buttonhole "Start/Stop" button again. and press the * Sew the right side of the buttonhole the same length as the left. 86