Brother International Innov-is XJ2 Operation Manual - Page 93

e Select and sew seam "3" as shown.  The fabric feeds forward while stitching backward. f Select and sew seam "4" as shown.  The seam will be connected to the starting point of seam 1. Zipper Insertion  Centered Zipper Use for bags and other such applications. Memo • For details on stitch patterns, refer to "STITCH SETTING CHART" on page 197. Note • Make sure you sew using the middle needle position. UTILITY STITCHES c Press the seam allowance open and attach the zipper with a basting stitch in the middle of each side of the zipper tape. 1 Basting stitches a 2 Zipper 3 Wrong side c c b d Remove presser foot "J". Align the right side of the in zipper foot "I" with the presser foot holder, and pin attach the zipper foot. a b 1 Right c 2 Left 3 Needle drop point Note • When using zipper foot "I", make sure the straight stitch, middle needle position is selected. Rotate the handwheel toward you (counterclockwise) to make sure the needle does not strike the presser foot. 3 VARIOUS STITCHES e Topstitch 7 the seamed to 10 mm (approx. 1/4 to 3/8 inch) from edge of the fabric, then remove the basting. a Select . b Attach presser foot "J" and sew straight the zipper opening. Change to a basting stitches stitch up to (page 68) and sew to the top of the fabric. b d 1 Basting stitches 2 Reverse stitches c 3 End of zipper opening 4 Wrong side a CAUTION • Make sure the needle does not strike the zipper during sewing. If the needle strikes the zipper, the needle may break, leading to injury.  Inserting a Side Zipper Use for side zippers in skirts or dresses. a Select . Note • Make sure you sew using the middle needle position. 91