Brother International Innov-is XJ2 Operation Manual - Page 54
Insert the plug for the main foot controller into the foot
View all Brother International Innov-is XJ2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
SEWING b Adjust the spacing and side pedal. between the main foot controller * Use the markings on the mounting plate as a convenient guide to adjust the spacing. g Turn on the machine. And then touch display page 2 of the settings screen. and Memo • Before specifying the functions, connect the multifunction foot controller to the machine. The settings screen is activated the first time that the machine detects the multi-function foot controller. h Select the functions to be function foot controller. performed by the multi- c Firmly tighten the mounting screws foot controller and side pedal. to secure the main c a b Memo • To readjust the spacing between the main foot controller and side pedal, slightly loosen the mounting screws, and then adjust the positions of the main foot controller and side pedal. d Turn off the machine. e Insert the main foot plug for the controller. side pedal into the jack on the f Insert the plug for controller jack on the main the right foot side controller into the of the machine. foot b a 2 3 Controller Functions that can be specified 1 Main foot controller Start/Stop 2 Heel switch 3 Side pedal Select any of the following: • [Thread Cutting] • [Needle Position - Up/Down] • [Single Stitch] • [Reverse Stitch] (Reinforcement Stitch) * • [Presser Foot Up/Down] • [No Setting] * If you set the "Reverse Stitch" function on the heel switch, machine operates the same as pressing (Reverse stitch button) on the machine. * Reinforcement stitching may be applied depending on the selected stitch pattern. For the details, refer to "Automatic Reverse/Reinforcement Stitching" on page 55. Memo • If you set [Reverse Stitch] on the side pedal, you can create a darning stitch effect using zigzag stitches. With both feet, keep pressing the main foot controller, and repeat pressing and releasing the side pedal to sew forward and reverse in turn. Machine will reverse at the speed you press the main foot controller. 1 Main foot controller 2 Foot controller jack Memo • The length of the cord for the main foot controller can be adjusted. (page 53) 52