Brother International Innov-is XJ2 Operation Manual - Page 48
Using the Compact Dual Feed Foot
View all Brother International Innov-is XJ2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
CHANGING THE PRESSER FOOT d Set the side of adapter on the presser foot bar, aligning the flat the adapter opening with the flat side of the presser bar. Align the screw holes in the adapter and presser foot bar, and then securely tighten the screw with the disc-shaped screwdriver. c Position the compact dual feed bar by aligning the notch of the foot to the presser compact dual feed foot foot to the large screw. Side view e Turn the hand. included small screw 2 or 3 times with your d Hold right the compact dual feed foot in place with your hand, then using the disc-shaped screwdriver securely tighten the large screw. f Touch to unlock all keys and buttons. Using the Compact Dual Feed Foot The compact dual feed foot enables you to have best fabric control when sewing difficult fabrics that slip easily, such as quilted fabrics or fabrics that tend to stick to the bottom of a presser foot, such as vinyl, leather or synthetic leather. Note • When sewing with the compact dual feed foot, sew at medium to low speeds. Memo • When selecting stitches to be used with the compact dual feed foot, only the stitches that can be used will be activated on the display. • When sewing fabric that easily sticks together, a more attractive finish can be achieved by basting the beginning of sewing. Attaching the Compact Dual Feed Foot a Remove the presser foot. (page 45) b Loosen the the presser screw of the foot holder. presser foot holder to remove 1 Presser foot holder screw 2 Presser foot holder CAUTION • Use the included screwdriver to firmly tighten the screw. If the screw is loose, the needle may strike the presser foot and possibly cause injury. e Plug the the jack connector of the compact dual on the back of your machine. feed foot into f Touch to unlock all keys and buttons. All keys and operation buttons are unlocked, and the previous screen is displayed. g Place the fabric under the compact dual feed foot the needle at the starting point of the stitching. with ab 46