Brother International Innov-is XJ2 Operation Manual - Page 152

MAKING EMBROIDERY ADJUSTMENTS Using the Thread Trimming Function (Jump Stitch Trim) The thread trimming function will automatically trim any excess thread jumps within the color. This function is initially turned ON. To turn this function OFF, touch key and then . * Your customized setting remains after turning the machine off and on. For example: Touch to select 25 mm (approx. 1 inch) and the machine will not trim a jump stitch of 25 mm or less before moving to the next stitching. a 1 Jump stitch a Touch . b Touch function. to turn off the thread trimming Note • If design has many trims it is recommended to select a higher jump stitch trim setting in order to reduce the amount of excess tails on backside of fabric. • The higher number of the jump stitch length selected, the fewer number of times the machine will trim. In this case, more jump stitches remain on the surface of the fabric. Adjusting the Embroidery Speed a Touch .  The settings screen appears. b Touch .  The embroidery settings screen appears. c Display [Max Embroidery Speed] in the embroidery settings screen.  The key will display as . The machine will not trim the thread before moving to the next stitching.  Selecting the Length Of Jump Stitch Not to Trim When the thread trimming function is turned on, you can select the length of the jump stitch. Select a setting from 5 mm to 50 mm in 5 mm increments. * Your customized setting remains after turning the machine off and on. Touch or to select the length of jump stitch. d Use speed. to change the maximum embroidery Memo • SPM is the number of stitches embroidered in one minute. • Decrease the embroidery speed when embroidering on thin, thick, or heavy fabrics and when using a specialty thread like a metallic thread. • The setting specified before the main power is set to OFF remains selected the next time that the machine is turned ON. e Touch . 150