Brother International Innov-is XJ2 Operation Manual - Page 53

SEWING Note • When cutting thread thicker than #30, nylon monofilament thread, or other decorative threads, use the thread cutter on the side of the machine. k When the needle has stopped foot and remove the fabric. moving, raise the presser  Using the Foot Controller You can also use the foot controller to start and stop sewing. Memo • When the foot controller is connected, the "Start/ Stop" button cannot be used to start sewing. • The foot controller cannot be used when embroidering. a Turn off the machine. b Insert the foot controller jack on the machine. plug into the foot controller 1 Foot controller jack a c Turn on the machine. d Slowly depress the foot controller to start sewing. WARNING • The advanced multi-function foot controller contains small parts. Keep the product out of the reach of children to prevent accidental ingestion of small parts. Note • (For U.S.A. only) Foot controller: Model X This foot controller can be used on the machine with product code 882-W73. The product code is mentioned on the machine rating plate. 1 2 3 4 No. 1 Main foot controller 2 Side pedal 3 Mounting plate 4 Mounting screw × 2 Part Name a Align guide the smaller end of the mounting on the bottom of the side pedal, plate with the and then gently fasten them together with the mounting screw. Align the larger end of the mounting plate with the guide on the bottom of the main foot controller, and then gently fasten them together with the mounting screw. SEWING BASICS 2 Memo • The speed that is set using the sewing speed controller will be the foot controller's maximum sewing speed. e Release the foot controller to stop the machine. Using Advanced Multi-Function Foot Controller (Included with Some Models) With the advanced multi-function foot controller, various sewing machine operations in addition to starting/stopping sewing, such as thread cutting and reverse stitching, can be specified to be performed. c a b 1 Guide on side pedal 2 Mounting plate 3 Guide on main foot controller Memo • The side pedal can be mounted on either the left or right side of the main foot controller. • The main foot controller and side pedal can also be used without installing the mounting plate. 51