Brother International Innov-is XJ2 Operation Manual - Page 106
About the Embroidery Unit
View all Brother International Innov-is XJ2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 106 highlights
BEFORE EMBROIDERING d Plug LED the connector of the embroidery pointer into the jack on the back foot "W+" with left side of your machine. e Touch to unlock all keys and buttons. All keys and operation buttons are unlocked, and the previous screen is displayed. About the Embroidery Unit Note • To avoid distorting your embroidery design, do not touch the embroidery carriage and frame when the machine is embroidering. • Store the embroidery unit in a safe place to prevent damage to the unit. Memo • You can also sew utility/decorative stitches with the embroidery unit attached. Touch and . The feed dogs will automatically raise for utility and decorative stitching. Attaching the Embroidery Unit a Turn the main attachment. power to OFF, and remove the flat bed CAUTION • Do not move the machine with the embroidery unit attached. The embroidery unit could fall off and cause injury. b Insert the embroidery unit connection into the connection port of the machine until it snaps into place. IMPORTANT • Keep your hands and foreign objects away from the embroidery carriage and frame when the machine is embroidering. Damage or malfunction may result. • Be sure to turn off the power before attaching or removing the embroidery unit. Otherwise, the machine may be damaged. • Do not touch the inner connector of the embroidery unit. The pins on the embroidery unit connection may be damaged. • Do not apply strong force to the embroidery unit carriage or pick up the unit by the carriage. Otherwise, the embroidery unit may be damaged. • Do not push on the carriage when attaching the embroidery unit onto the machine. Moving the carriage may damage the embroidery unit. • Make sure that there is enough space for the carriage of the embroidery unit to move. If the embroidery frame comes into contact with an object, the pattern may not be embroidered correctly, or damage may result. • Do not touch the embroidery carriage until the initialization finishes. Note • Be sure there is no gap between the embroidery unit and the machine. If there is a gap, the embroidery patterns will not embroider with the correct registration. c Turn the main power to ON. The following message will appear. d Touch . The carriage will move to the initialization position. 104