Brother International Innov-is XJ2 Operation Manual - Page 72
Flat Fell Seam, Pintuck
View all Brother International Innov-is XJ2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
UTILITY STITCHES f Smooth the gathers by ironing them. d Lay both seam allowances on the seam (cut seam) and iron them. side of the shorter g Sew on the seam line and remove the basting stitch. Flat Fell Seam Use for reinforcing seams and finishing edges neatly. a Select and attach presser foot "J". b Sew the seam from the side line, then cut half of on which the flat fell the seam allowance seam will lie. * When the automatic thread cutting and automatic reinforcement stitching are preset, reverse stitches will be sewn automatically at the beginning of sewing. Press (Reinforcement stitch button) to sew a reinforcement stitch and trim the thread automatically at the end of sewing. 1 Wrong side e Fold one, the longer seam allowance around and sew the edge of the fold. the shorter 1 Wrong side Finished flat fell seam 1 About 1.2 cm (approx. 1/2 inch) 2 Wrong side c Spread the fabric out along the seam. 1 Surface Pintuck a Mark along the folds on the wrong side of the fabric. 1 Seam 2 Wrong side 1 Wrong side 70