Brother International Innov-is XJ2 Operation Manual - Page 98

MAKING STEP STITCH PATTERNS (FOR 7MM SATIN STITCH PATTERNS ONLY)  If the stitch pattern is bunched: Touch in the [Fine Adjust Verti.] display.  The displayed value increases each time the button is touched and the stitch pattern will lengthen. MAKING STEP STITCH PATTERNS (FOR 7MM SATIN STITCH PATTERNS ONLY)  If the stitch pattern has gaps: Touch in the [Fine Adjust Verti.] display.  The displayed value decreases each time the button is touched and the stitch pattern will shorten. You can use keys to create a step effect, also called step stitch patterns. • Touch to move the stitch pattern a distance equal to half of the stitch pattern's size to the left or right. • To combine the stitch patterns, refer to page 53. Example:  If the stitch pattern is skewed to the left: Touch in the [Fine Adjust Horiz.] display.  The displayed value increases each time the button is touched and the stitch pattern will slide to the right.  If the stitch pattern is skewed to the right: Touch in the [Fine Adjust Horiz.] display.  The displayed value decreases each time the button is touched and the stitch pattern will slide to the left. a Select (9-11). b Touch c Touch so that it displays . . e Sew the stitch pattern again. * If the stitch pattern still comes out poorly, make adjustments again. Adjust until the stitch pattern comes out correctly. Memo • You can sew with the setting screen on the display. f Touch to return to the original screen.  The next stitch pattern will move to the right. d Select (9-11) again. 96