Brother International Innov-is XJ2 Operation Manual - Page 116

EDITING PATTERNS * Touch to return to the embroidery frame selection screen. d Touch . c Select size. the direction in which to change the pattern Changing the Size and the Density of the Pattern If is selected, you can change the pattern size while maintaining the thread density. The machine recalculates the stitch density automatically. With this function, the pattern will be enlarged or reduced at a larger ratio than with normal pattern resizing. a Touch , and then touch . b Select in the size window. d When you select in step b, touch , and then touch to change the thread density. * : Make the pattern less dense. * : Make the pattern more dense. e Touch . Creating Repeated Patterns Using the border function, you can create repeated patterns. You can also adjust the spacing of the patterns. a Touch , and then touch . * : Change the pattern size while maintaining the number of stitches. Enlarged patterns will be less dense, and reduced patterns will be more dense. In order to maintain embroidering quality, there is a limit to how much the embroidery pattern can be enlarged or reduced. * : Change the pattern size while maintaining the thread density. After the pattern size is changed, the thread density can be changed in the edit screen. The number of stitches is recalculated depending on the pattern size. Memo • This function cannot be used with alphabet character patterns, frame patterns, repeated patterns or buttonhole patterns. • Patterns with a large number of stitches (100,001 or more) cannot be resized while maintaining a thread density. • You can also change the size by dragging the red point at the sides and corners of the pattern. b Select the direction in which the pattern will be repeated. * : Repeat the pattern above. * : Repeat the pattern below. * : Delete above pattern. * : Delete below pattern. 114