Brother International Innov-is XJ2 Operation Manual - Page 143
Adjustments During The, Embroidery Process
View all Brother International Innov-is XJ2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 143 highlights
ADJUSTMENTS DURING THE EMBROIDERY PROCESS If the Thread Breaks or the Bobbin Runs out of Thread During Embroidering a Redo the upper threading or replace the bobbin. If the upper thread breaks, stop the machine, trim the bobbin thread, and then rethread the machine. ADJUSTMENTS DURING THE EMBROIDERY PROCESS d Lower the presser foot and press the button to continue embroidering. "Start/Stop" Resuming Embroidery after Turning off the Power The current color and stitch number are saved when embroidery is stopped. The next time the machine is turned on, you have the option to continue or delete the pattern. If the bobbin thread is almost empty or broken, touch of the displayed message, remove the embroidery frame, and then replace the bobbin. 4 BASIC EMBROIDERY Note • If [Upper and Bobbin Thread Sensor] in the settings screen of the machine is set to [OFF], the message shown above does not appear. b Touch . c Touch , , , or to move the needle back the correct number of stitches before the area where the thread broke, and then touch . • Touch to restart from the beginning. Memo • If you cannot move back to the spot where the thread broke, touch or to select the color and move to the beginning position of that color, then use , , , or to move ahead to slightly before where the thread broke. 141