Brother International Innov-is XJ2 Operation Manual - Page 132

CONFIRMING THE PATTERN POSITION CONFIRMING THE PATTERN POSITION The pattern is normally positioned in the center of the embroidery frame. If the pattern needs to be repositioned for better placement on the garment, you can check the layout before starting embroidery. Checking the Needle Drop Point with the Embroidery Foot "W+" with LED Pointer a Touch in the embroidery screen.  The LED pointer indicates the needle drop point. c Display [Embroidery Foot with Adjustment] in the embroidery LED Pointer setting screen. Note • As a default, appears gray. After the embroidery foot "W+" with LED pointer is attached to the machine, the key becomes available and settings can be specified. d Touch .  The Embroidery Foot "W+" with LED Pointer Adjustment screen appears. 1 Memo • When the LED pointer turns on, the presser foot height is automatically adjusted according to the fabric thickness. • appears when the embroidery foot "W+" with LED pointer is attached to the machine. • If is not displayed, you cannot use the LED pointer. • The LED pointer turns off automatically by lowering the presser foot or returning to the previous page. Note • With spongy fabric, the position may not be accurate due to the various depths of the fabric. • With fabric that has a very uneven surface such as quilting, the fabric thickness may not be correctly measured. In this case, the pointer indication should be used only as a reference.  Adjusting the LED Pointer Adjust the LED pointer if it indicates a point different than the actual needle drop point. Before adjusting the LED pointer, mark the actual needle drop point on the fabric to be embroidered, and attach the embroidery frame. a Touch .  The settings screen appears. b Touch .  The embroidery settings screen appears. 1 LED pointer adjustment Note • The specified setting is saved in the machine's memory. This is useful for positioning during continuous embroidering. • For normal use, return the setting to [00]. e Use or indicates the to adjust the LED pointer actual needle drop point. so that it Memo • In order to more accurately check the needle drop point, turn the handwheel toward you (counterclockwise) to lower the needle. f Touch to return to the original screen.  Adjusting the Brightness of the LED Pointer a Follow the steps from Pointer" on page 130 a to c to display of "Adjusting the LED the embroidery foot with LED pointer adjustment screen. b Use pointer. or to adjust the brightness of the LED c Touch to return to the original screen. 130