Brother International Innov-is XJ2 Operation Manual - Page 159

e Select the desired pattern from the desired category. And then touch . EMBROIDERY APPLICATIONS i Attach the spool the machine. stand (included with some models) to At this time, do not raise the telescopic thread guide shaft. 1 2 1 Couching patterns 2 Fill couching embroidery font f Touch raise the to lock all keys presser foot lever. and buttons, and then g Attach embroidery couching foot "Y". * Attach the embroidery couching foot through the front of the buttonhole lever. a * Refer to "Using the Spool Stand" on page 41. j Insert the yarn slot on the top guide for embroidery left of the machine. couching into the 5 1 buttonhole lever ADVANCED EMBROIDERY CAUTION • When using the embroidery couching foot "Y", make sure the machine is in embroidery mode. Otherwise, the needle will strike the embroidery couching foot, causing the needle to break and possibly causing injury. h Rotate the handwheel and check that the left half of the hole in embroidery the needle is in couching foot "Y". If the needle is not in the left half, use the multi-purpose screwdriver to turn the screw of embroidery couching foot "Y" to adjust the position of the embroidery foot. Turn the screw toward you to move the embroidery foot to the right. Turn the screw toward the back to move the embroidery foot to the left. After making adjustments, rotate the handwheel and check that the needle does not touch the presser foot. k Pass the the yarn yarn through guide (1) to the telescopic (2). thread guide and 1 2 Note • Pull off an appropriate amount of yarn from the ball so that the yarn does not become taut. • Make sure that the yarn does not become entangled as you work. 157