Brother International Innov-is XJ2 Operation Manual - Page 131

ATTACHING THE EMBROIDERY FRAME ATTACHING THE EMBROIDERY FRAME Note • Wind embroidery bobbin thread and insert the bobbin before attaching the embroidery frame. Check that there is enough thread in the bobbin. • Make sure that the frame-securing lever is correctly lowered after the embroidery frame has been installed in the embroidery frame holder.  Removing the Embroidery Frame a Press presser (Presser foot. foot lifter button) to raise the b Raise the frame-securing lever. a Press (Presser foot lifter button) to raise the presser foot. b Align the embroidery frame guide of the embroidery frame holder. with the right edge c Pull the embroidery frame toward you. 4 BASIC EMBROIDERY 1 Embroidery frame holder 2 Embroidery frame guide c Slide the embroidery frame into the holder, making sure to align the embroidery frame's with the holder's . 1 Arrow mark d Lower the frame-securing lever to be level with frame to secure the embroidery frame in the the embroidery frame holder. 1 Frame-securing lever 129