Brother International Innov-is XJ2 Operation Manual - Page 55

SEWING i Touch .  Adjusting the Length of the Cord for the Main Foot Controller j Sew trial desired. stitches and confirm that the settings are as a Unwind the cord for the main foot controller. Pressing down on the main foot controller increases the sewing speed; releasing the pressure on the main foot controller decreases the sewing speed. Release the main foot controller or side pedal to stop sewing. b Guide the cord between the tabs. 2 c Wind the cord until it is the desired length. * The cord can be wound either clockwise or counterclockwise. SEWING BASICS Memo • The speed that is set using the sewing speed controller will be the main foot controller's maximum sewing speed. • When the multi-function foot controller is connected, the "Start/Stop" button cannot be used to start sewing. d Pass the cord between the tabs. Note • In order to avoid stepping on the cord with the main foot controller, pass the cord between the tabs. Memo • When storing the cord, pass it between the tabs, and then insert the plug into the jack on the main foot controller. Combining Stitch Patterns Stitch patterns from the following categories can be combined. 53