Brother International Innov-is XJ2 Operation Manual - Page 95

Changing the Start and End Angles of the Stitch Pattern (Stitch Tapering Function) The angles of the start and end of stitch patterns can be changed. This is useful when sewing projects with sharply defined angles or decorative stitching, attaching appliqués, etc. UTILITY STITCHES b If necessary, change the stitch width and stitch length. c Touch . Use the method for finishing sewing the stitch pattern, according to your needs. • Method 1: Begin Changing the Angle at the End of Sewing by Pressing the "Reverse Stitch" Button (page 93) • Method 2: Sewing a Specified Number of Stitch Patterns (page 94) Note • Using the same material and stitch pattern as your project, sew trial stitches to check the result. If necessary, attach a stabilizer material. • If reinforcement stitches at the beginning and end of sewing are needed, use (Reinforcement stitch button). (Reverse stitch button) cannot be used for reinforcement stitching when stitch tapering function is on.  Method 1: Begin Changing the Angle at the End of Sewing by Pressing the "Reverse Stitch" Button a Touch pattern for stitch , then tapering. , and then select a stitch d Touch , select the angle settings for the start and 3 end of sewing, and then touch . VARIOUS STITCHES 1 2 3 1 Select the start or end of sewing. 2 Select an angle. 3 Specify that the angle does not change. 93