Brother International Innov-is XJ2 Operation Manual - Page 137

THE 2-POINT EMBROIDERY POSITIONING FUNCTION Note • If is displayed to the left of the positioning keys, the LED pointer has shifted from its initial position. Touch to adjust the position. Note • Set the position of the LED pointer to a position that is not too close to the first reference point. If it is too close, a message will appear, prompting you to reposition it. • In order to increase the accuracy of the pattern alignment, align the position of the LED pointer above the second mark (3) and as far away from the center mark as possible. n Touch .  The pattern is repositioned. l Touch . m Touch the positioning keys to move the embroidery frame until the position of the LED pointer and the center of the second mark are aligned. To change the speed that the frame moves, use the frame movement speed keys. If it is difficult to make a precision alignment, touch a frame movement speed key for a slower speed. 1 2 4 o Press the "Start/Stop" button to start embroidering.  Another example By specifying an alignment point and direction, embroidery patterns can be positioned and aligned for various purposes. In this example, a pattern is aligned at the left center of the towel. BASIC EMBROIDERY 1 Positioning keys 2 Frame movement speed keys d a Use a chalk position. pencil to mark the desired embroidering The line drawn for the reference direction should be longer. c 3 Center of the second mark 4 Light of the LED pointer a 1 Chalk pencil mark 135