Brother International Innov-is XJ2 Operation Manual - Page 173
When loading is finished, specify the [Gray-Scale
View all Brother International Innov-is XJ2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 173 highlights
b Select the device you saved the data to. c Select the data, and then touch . LINE CONVERSION g In the screen for confirming the converted image, can adjust the [Gray-Scale Detection level] again, you if necessary. d When loading is Detection level] finished, specify the [Gray-Scale on the screen if necessary. The [Gray-Scale Detection level] can change the black and white threshold for the image. 1 1 The settings for the lines to be embroidered appear. * If you do not know how the settings should be changed, first continue the operation without specifying settings and check the results. * : Enlarge the image. * : Display the image before being converted. Compare the images before and after being converted, and then change the settings if necessary. * : Return to the previous screen. After changes to the settings for [Gray-Scale Detection level] are applied, changes to . Touch desired. to check that the image is as h Touch . The pattern drawing screen appears. i If necessary, edit the loaded image. 6 MY DESIGN CENTER * If you do not know how the settings should be changed, first continue the operation without specifying settings and check the results. * To stop loading and return to the screen in step b, touch . The loaded image will be deleted when you return to the previous screen. e Move to frame the image for the pattern. f Touch . The screen for confirming the converted image appears. 1 * After the loaded image is converted to stitching, it appears as a background in the pattern drawing screen. Use gauge 1 to adjust the transparency of the background. Each touch of lightens the background, making the line pattern darker. Each touch of darkens the background, making the line pattern lighter. 171